Home > Products > Carbon steel plate/ flat bar/round bar > S50C/C50/1050 plate carbon steel
S50C/C50/1050 plate carbon steel
- 5000 Ton / Tons per Month
- shenzhen
- T/T
Product Details
Standard: | AISI, ASTM, DIN, GB, JIS | Grade: | S45C | Thickness: | 8~600mm |
Place of Origin: | Guangdong, China | Brand Name: | Circle Four | Model Number: | S45C |
Type: | Steel Plate | Technique: | Hot Rolled | Surface Treatment: | Coated |
Application: | Container Plate | Special Use: | High-strength Steel Plate | Width: | 600~2300 |
Length: | 3000~5800 |
Product Description
plate carbon steel
1. Main application
(1) this steel is widely used in machinery manufacturing.
(2) For the manufacture of high strength requirements parts, such as gears, shafts, piston pin and the uneven force big machining parts, forgings, stampings and bolts, nuts, pipe joint.
2. Specification:
Round bar | Diameter(mm) | Length (mm) |
|
50~500 | 2000~5800 |
| |
plate/sheet | Thickness(mm) | Width (mm) | Length (mm) |
20~600 | 600~2300 | 2000~5800 |
3. Delivery condition:
Acc. to your request—Standard steel bar(sawing)
——non-standard steel bar(sawing)
or Mill deliver condition,without sawing or cutting
Conventional or ESR, hot rolled or forged, black surface or milling
Hardness: annealed to HB≤215
4. Features:
(1) Higher strength in a high-quality carbon steel.
(2) Mechanical properties of this steel is very good.
(3) the hardeness of this steel could be 42~46HRC by quenching.
(4) due to poor hardenability, general normalized state, high mechanical performance requirements, the use of quenched and tempered.
(5) Moderate in cold plastic deformation, the machinability by annealing and normalizing is better than quenched and tempered.
5. Chemical analysis
C | Si | Mn | P≤ | S≤ | Cr |
0.50~0.60 | 0.20~0.30 | 0.70~0.90 | 0.030 | 0.030 | 0.01~0.03 |
6. Compared grades(based on usage)
Chinese | American | German | Swedish | Japanese |
GB | AISI | DIN | ASSAB | JIS |
45 | 1045 | C45 |
| S45C |
7. Heat treatment (for reference)
quenching | tempering | tensile strength | yield strength | elongation |
820~870 °c | 550~650 °c | ≥600MPa | ≥355MPa | ≥16% |
8. Our advantage
(1) lower price: less producing cost for the small steel factory, so we could supply lower price to our customers.
(2) large stocks: we are the leading steel agency in our country, so we have large stocks for many steel grade and sizes.
(3) quality assurance: 100% according the steel grade standards, MTC available before the shipment.
S50C photos for your reference:
(1)Four sizes cutting
(2)Original plate no cutting size
We also have S45C round bars,photo for your checking below:
(1)Hot rolled bar
(2)Forged bar
Our factory informations:
Skype:tongtongyaya
WhatsApp:+086 13925513875
QQ:358030031
Contact Us
- Dongguan Circle Four Metal Materials Co., Ltd.
- Contact nameJOEY ZHANG
- Phone086-0769-85313622
- Addresschangan Dongguan,Guangdong
- Hot Rolled S460 S500 S550 S690 S890 Structural Steel Plate
- Hot Rolled Alloy Steel Sheet ASTM A516 Gr70 A36 St37 S45c St52 Ss400 S355j2 Q345b Q690d S690 65mn 4140 Carbon Steel Plate
- Mild Structural Steel Plate A36 Q235 Q345 S275jr S235jr S355jr S355j2 Ms Carbon Steel Plate
- AS/NZS 4671standard SL62/SL72//Rl718/Rl818/ Construction Concrete Reinforcement Mesh Welded-Wire-Mesh
- P355 P355N P355NL P355GH Boiler and Presure Vessel Steel Plate
- A36 Q235 Q345 Q355 4340 4140 Hot Rolled Steel Plate
- Production of Hastelloy alloy UNS N10276 bar, forged plate (strip), wire, and pipe
- ASTM A283 A387 Hot Rolled Alloy Steel Plate
- S235 S275 S355 Mild Steel Plate
- A514 A517 A516 Q245R Q345R Container Carbon Steel Plate
- ASME SA514 Gr.q SA517 Gr.q High Strength Alloy Steel Plate
- Low Temperature Container 09mnnidr SA203 SA204 SA302 Steel Plate
- S460 S500 S690 S890 S960 Hot Rolled High Strength Structure Steel Plate
- Alloy Steel Plate Hot Rolled ASTM A387 A514 A517 Pressure Vessel Steel Plate
- P265gh P275gh P235gh Boiler and Pressure Vessel Steel Plate
- Hot Rolled 4130 4140 4340 Alloy High Strength Steel Plate
- Hot Rolled A36 S235 S275 Carbon Steel Plate
- ASTM A299 Grade B Boiler Steel Plate
- Hot Rolled SA537 Cl1 Carbon Structural Steel Plate
- A633 A302 Hot Rolled Carbon Steel Plate
- ASTM A572 Gr. 50 A588 A633 Low Alloy High Strength Steel Sheet
- Wnm360 400 450 500 Abrasion Resistant Steel Plate
- Low Alloy High Strength Steel Plate EN S355m S355ml S355n S355nl
- A203 Low Temperature Pressure Vessel Steel Plate
Popular Searches
Recommended Products
- GH4145/Ni270/1J87/1J46/NC003/N02200 Nickel Alloy Plate/Sheet
- Lork Good Creep Oxidation Resistance Monel 502 Nickel Alloy Bar for Propeller Shafts
- NS312/GH4648/GH3625/NS1403/GH586 High temperature Nickel-based Alloy Plate/Sheet
- N10001/N10276/N10675/N06625/Inconel625 Nickel Alloy Plate/Sheet
- Lork Hot Selling Ni-Cu Alloy Monel 404 Nickel Plate for Chemistry and Petrochemical Yield
- 1J40/1J85/CN44/N04400/N08925/NS1403 Nickel Alloy Plate/Sheet Manufacture in China
- GH4133/N06059/GH2080/GH163/GH2747 Nickel Alloy Plate/Sheet Hot/Cold Rolled
- GH2696/GH2080/GH4698/N09925/GH105 Nickel Alloy Plate/Sheet Hot/Cold Rolled
- 2.4375/NC040/GH1131/GH141/GH4698 Nickel Alloy Plate/Sheet
- Inconel X750/N06625/N07750/Ni205/Invar36 Nickel Alloy Plate/Sheet ASTM/AISI
- Carbon Seamless Steel Pipe ASTM A53/A106 Gr.B
- Nickel 201/N02200/200/N4/N6 Pure Nickel Alloy Plate/Sheet BA/No.1 Surface
Find Similar Products By Category
- Minerals & Metallurgy > Steel > Steel Sheets
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- Services
- Latest Sourcing Requests
- Product Update
- Companies of Today
- GoldSupplier.com Mobile Site
- B2B Articles
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
JOEY ZHANG
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-