Home > Products > Basalt fiber > 2016LUKE--Alkali-resistant Basalt Roving for Fiber Reinforced Concrete
2016LUKE--Alkali-resistant Basalt Roving for Fiber Reinforced Concrete
- 100 Ton / Tons per Month
- Qingdao port Shanghai port Tianjin port
- T/T L/C D/P D/A Credit Card PayPal
- Si3N4 radiation tube/ SiC pipes
- silicon nitride bonded silicon carbide NBSIC sheath tube (thermocouple protection tubes)
- silicon carbide bonded si3n4 protection tube (NSiC super ceramic)for immersion heater
- Silicon Nitride heater protection tube, NBSiC protective pipes, advanced N-SiC radiation tubes
- Erosion resistance heater protection silicon nitride tube, NBSiC protective pipes, advanced NSiC radiant tubes
- NSiC heater protection tubes, nitride bonded silicon carbide ceramic tubes, advanced NSiC radiant tubes
Product Details
Place of Origin: | Shandong, China | Brand Name: | LUKE | Model Number: | LKBF |
Application: | high-speed railways | Shape: | monofilament | Dimensions: | length 6~30mm |
Chemical Composition: | SiO2 CaO MgO Fe2O3 |
Product Description
2016LUKE--Alkali-resistant Basalt Roving for Fiber Reinforced Concrete
Introduction
Basalt fiber is a new high-performance environmentally friendly green inorganic fiber material, which is made of basalt ore in 1500 ℃ high temperature melting and wire drawing. Basalt fiber is with high strength, electrical insulation, corrosion resistance, and high temperature resistant, it can be mixed with cement concrete and asphalt with strong crack resistance, enhanced toughening effect.
Specification
Basalt fiber chemical composition
chemical composition | Mass percentage |
SiO2 | 52~58 |
Al2O3 | 14~19 |
CaO | 5~9 |
MgO | 3.0~6 |
Na2O + K2O | 3~6 |
TiO2 | 0.5~2.5 |
Fe2O3 + FeO | 9.0~14.0 |
Others | 0.09~0.13 |
Basalt fiber technology Parameter
parameter | |
Dia(μm) | |
Length(mm) | |
elastic modulus(Gpa) | 93~110 |
Tensile Strenght (Mpa) | 2800~3800 |
Elongation at break | ≤3.1% |
water absorption | <0.1% |
Alkali resistance, tensile strength retention rate | ≥75% |
Retention rate of tensile strength (Mpa) under heat treatment | |
20℃ | 100 |
200℃ | 95 |
400℃ | 82 |
Features
1. High temperature resistance, low temperature resistance(-269~650℃)
Mixing with the hot asphalt, the asphalt material performance will not change, and not bring chemical or dissolution reaction with asphalt, it can effectively change the asphalt cold hardening, softening temperature condition.
2. Superior water erosion performance, low water absorption, moisture absorption <0.1%, and the absorption capacity does not change with time
3. elastic modulus(93~110GPa)
4. High Tensile Strenght, tensile strength is 2 to 2.5 times than metal, and keep stable at 100 ~ 250 ℃.
5. High Sound Absorption Coefficient, low thermal conductivity
6. stable Chemical stability, wear resistance, chemical corrosion resistance, excellent anti-aging properties
7. good surface affinity with cement concrete, asphalt or concrete, good dispersion, strong adhesion, same coefficient of thermal expansion and contraction, basalt fiber is wire drawing from natural volcanic rock directly.
Application
After basalt fiber mixing with cement concrete and mortar, it is with volume stability, good workability, durability, reinforced with superior toughness, crack resistance, impact resistance, to extend the life of the role architecture, can be widely used in national defense field engineering and traffic infrastructure, petrochemical, fire fighting, environmental protection, automobile, shipbuilding and other fields, also can be applied in the field of construction of houses, bridges, highways, high-speed railways, urban elevated highways, runways, seaport terminals, subway tunnels.
Dosage
Basalt fiber original wire short cut length should be close to the maximum particle size of the concrete, and no less than 15mm, no more than 30mm, which is recommended dosage 2-4kg / m3, basalt fiber original wire gum dipping general application length is 6mm-50mm, mainly used in place of steel fiber, which is recommended 4-8 kg / m3, this two kinds of fibers having a same modulus of elasticity and nature, which can be used in combination to improve the overall performance of concrete.
Contact Us
- Shandong Luke Composite Material Co., Ltd.
- Contact namexigang He
- Phone86-0538-8283319
- AddressRoom 501, Unit 3, Building 4, Fuyuan Jiayuan, Mid. Sec., Wenquan Road
- NSiC heating protective tubes, nitride bonded silicon carbide ceramic tubes, advanced NSiC radiant tubes
- silicon carbide ceramic SiC Burner tubes as RSiC burner Sleeve with1700C recrystallized SiC
- ReSiC burner nozzles, recrystallized silicon carbide ceramic burner tubes, RSiC heating protective tubes
- RSiC batts,ReSiC kiln shelves, recrystallized silicon carbide ceramic slabs, RSiC setter plates
- recrystallized silicon carbide cross beams, ReSiC kiln furniture system RSiC loading beams
- Inner Mongolia High Quality Wholesale Simn Silicon Manganese
- Factory Directly Supply Calcium Silicon /Sica/Casi Metal for Iron Cast and Steelmaking
- Brazil Original Packing Seal Ferro Niobium Fenb 60 65 70
- Good Price Ferro Molybdenum 60% Ferro Alloy Ferromolybdenum
- RSiC burner tube / Nozzle / Lance /Cone/Sleeve by 1700C recrystallized SiC Ceramic
- ReSiC grinded beams, recrystallized silicon carbide ceramic supports, RSiC props, RSiC loading beams
- ReSiC grinded beams, recrystallized silicon carbide ceramic supports, RSiC props, RSiC loading beams
Popular Searches
Recommended Products
- SiCa powder for filling CaSi wire/ CaSi 0-3mm Si55 Ca30 /silicon calcium Alloy powder
- SiCa granule / Calcium silicon granule 3-8mm / CaSi lump manufacturer
- CaSi cored wires / SiCa cored wire /Calcium silicon ferro alloy wire
- low sulphur calcined petroleum coke/CPC/GPC for graphite electrode/steel plants/calcined petcoke
- Incoloy 825/625/926/925/N08810 Nickel Alloy Rod/Bar Stock in Factory
- N10665/NS322/N10675/NS323/N06030 Nickel Alloy Rod/Bar Polished
- NS321/N10276/N06455/N10001/2.4617 Nickel Alloy Rod/Bar Manufacturer supplies
- NS333/2.4819/N06022/N10001/Hastelloy C-2000 Nickel Alloy Rod/Bar ASTM/AISI standard
- Hastelloy C-22/Hastelloy C-4/B-3/C-276/ C Nickel Alloy Rod Customized Surface
- Hastelloy X/25/S/G-30/Hastelloy C-2000 Nickel Alloy Rod/Bar Hot/Cold Rolled Manufacturer
- Cold Rolling Aluminum Tube for Cooling circulation system
- calciumsilicon ferroalloy powder 0-2mm 0-3mm / CaSi alloy powder
Find Similar Products By Category
- Minerals & Metallurgy > Other Non-Metallic Minerals & Products
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
xigang He
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-