- Dongguan aimeike valve co. LTD
- China Manufacturer with main products:valve ,water meter ,brass ball valve with lock water meter ,plastics nylon water meter ,lead-free brass valve ,volumetric rotary-piston water meter ,rotary vane wheel dry-dial water meter ,rotary vane wheel dry-dial single-jet water meter ,woltman detachable water meter ,electronic remote-reading water meter ,balancing valve ,lead-free brass press ball valve
Home > Products > Brass Valve > With Ptfe Seat Ring Brass Shut Off Valve 1 Brass Ball Valve
With Ptfe Seat Ring Brass Shut Off Valve 1 Brass Ball Valve
- 100000 Piece / Pieces per Month
- Shenzhen
- T/T Credit Card PayPal Cash
- 7 days
Product Details
Application: | General | ||||
Place of Origin: | China | Media: | Water | ||
Temperature of Media: | Medium Temperature | Material: | Brass | Power: | Solenoid |
Pressure: | Medium Pressure | Structure: | Ball | Standard or Nonstandard: | Standard |
Product Description
Characteristic:
(1) The stop valve structure is simpler than the gate valve and is more convenient for manufacturing and maintenance.
(2) The secret cover is not easy to wear and scratch, and it is well sealed. There is no relative sliding between the disc and the body cover when it is opened and closed. Therefore, the wear and abrasion are not serious, the sealing performance is good, and the service life is long.
(3) When opening and closing, the valve travels small, so the height of the stop valve is smaller than the gate valve, but the structure length is longer than the gate valve.
(4) The opening and closing moment is large, the opening and closing are more laborious, and the opening and closing time principal.
(5) The fluid resistance is large, because the medium channel in the valve is more tortuous, the fluid resistance is large, and the power consumption is large.
(6) When the medium flow direction is known as the pressure PN ≤ 16MPa, the flow is generally used, and the medium flows upwards from the lower part of the disc; When the nominal pressure PN ≥ 20MPa, countercurrent is generally used, and the medium flows downstream from the disc to increase the seal energy. When used, the stop-valve medium can only flow in one direction and can not change the flow direction.
(7) The disc is frequently eroded when fully opened.
The stem axis of the cut-off valve is perpendicular to the seat cover. The stem opens or closes for a relatively short period and has a very reliable cutting action, making the valve suitable for use as a medium for cutting or regulating and throttle.
Component:
NO | Component | Material |
1 | Body | Brass |
2 | Bonnet | cuzn40pb2 |
3 | Brand | meet your inquire |
4 | Seat Ring | PTFE |
5 | Stem | Iron or Brass |
6 | Packing Rings | PTFE |
7 | Washer | EPDM |
8 | Handle | Iron or aluminum |
9 | Nut | Brass or iron |
How to clean brass turn on valve for toilet?
Simply rub a thin coat onto the brass, let sit for an hour or so, and then clean the piece with hot, soapy water. Another option is to make a paste of equal parts salt, flour, and white vinegar. Apply the paste to the brass and let sit for up to an hour. Rinse with warm water and buff dry.
Advantages:
1, simple structure, more convenient for manufacturing and maintenance.
2, small work trip, short opening and closing time.
3, good sealing, close cover between the small grinding force, longer life.
4.The structure of the cut-off valve body is straight-through, DC and right-angled. The straight-through type is the most common structure, but its fluid resistance is the largest. DC type fluid resistance is small, mostly used for fluids containing solid particles or large viscosity. The right-angled valve body is mostly forged and is suitable for cut-off valves with smaller pass-through and higher pressure.
5, in the opening and closing process, the friction of the close cover is smaller than the gate valve, and it is wearable.
6, usually only a secret cover, manufacturing process is good, easy to repair.
How to solder copper pipe to brass valve?
The copper valve body can be welded by the argon bai arc welding du method, but this is generally a zhi casting, and you can choose a brass argon arc welding wire suitable for argon arc dao welding of copper alloy castings, such as Viodin brass argon arc welding wire , Is a kind of brass welding wire used for argon arc welding, instead of brass gas welding brazing wire welding,
1. The oxide, oil and other dirt on the welding edge of the workpiece and the surface of the welding wire must be cleaned up before welding, otherwise it will cause defects such as pores and slag inclusion, which will reduce the performance of the weld.
2. When welding brass or bronze with argon arc welding, because the melting point of the mother body itself is relatively low, for the welding of ultra-thin tube or plate materials, please ensure that the weld pool can be formed normally.
3. When the plate thickness of the butt joint is less than 3mm, no bevel shall be provided; when the plate thickness is 3~10mm, 60°~70°V-shaped bevel; when the plate thickness is greater than 10mm, 60°~70°X-shaped bevel shall be provided . In order to avoid incomplete welding, generally no blunt edges are left.
4. The workpiece must be preheated before welding. The preheating temperature is 150~300℃ for plate thickness less than 3mm; when the plate thickness is greater than 3mm, the preheating temperature is 350~500℃.
5. Use DC positive polarity welding when performing TIG welding.
Contact Us
- Dongguan aimeike valve co. LTD
- Contact nameMary
- Phone86-0769-89790198
- Addressnangchen Dongguan,Guangdong
- ASTMA53 ERW PIPE
- Check Valve
- Pneumatic ceramic dual seal gate valve
- ESP fly ash inlet valve
- High-capacity 5 way solenoid valve GS020600V Sant Singaji power
- Durable screw pump for sale HSNH210-36 Central Java power
- Save Maintenance Costs mechanical servo valve G403-517A Suralaya Baru power
- Quick-response Double Pump GPA2-16-16-E-20-R6.3 Patratu power
- High-reliability GEAR OIL PUMP KCB-55 Kutch power
- Wear Resistance iron globe valve WJ65F1.6P Labuhan Angin power
- Convenient Maintenance Solenoid valve coil 4WE6D62/EG220N9K4/V Nashik power
- Corrosion-resistant gear box for sale M02225.OBMCC1D1.5A Rembang power
- High-efficiency accumulator kit NXQA.25/31.5 Sanjay Gandhi power
- Automated screw type impeller HSNH440 Barsingsar power
- Low Wear Rate Moog valve D633-303B Sri Damodaram Sanjeevaiah power
- Low Failure Rate installation screen by switching piece JL1-2.5/2 Gujarat power
- Energy-saving solenoid valve J-110V-DN6-D/20B/2A Mong Duong power
- High Quality level gauge BM26A/P/C/RRL/K1/MS15/MC/V/V Harduaganj power
- Customized 2 screw pump HSNH440Q2-46NZ Chhabra power
- Reliable MOOG Valve D633-521B Kamalanga power
- Enhanced double stop valve WJ50F1.6P Bakreshwar power
- Enhanced double stop valve WJ50F1.6P Bakreshwar power
- High-capacity Mechanical Stop Electromagnet DF2025 Udupi power
- Durable Pressure Switch T424T10030XBXFS350/525F VS Lignite power
Popular Searches
Find Similar Products By Category
- Mechanical Parts & Fabrication Services > Valves
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Mary
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-