Soft Board or FPC Transfer Tape Double Sided Acrylic Adhesive

Product Description:

FuYin transfer tapes are manufacture by UV curing.The release liner are kraft paper,glassine paper and PET.(PET release liner is for die-cutting in clear room and good die-cuttability).The important physical properties of FY-VHB transfer tape is high temperature and humidity resistance.The standard thickness is 0.05mm and 0.13mm.We also provide different reguest.The standard size is 1000mm*55m(we can supply other size on customer request).

Transfer tape without solvent:does not contain solven such as toluene,hexan etc.

3M™ VHB™ Adhesive Transfer Tapes F9460PC, F9469PC and F9473PC utilize the 3M™ High Performance Acrylic Adhesive 100MP, which has excellent long term holding power with much higher adhesion strength than typical pressure sensitive adhesive systems. These 3M™ VHB™ Adhesive Transfer Tapes are transparent and are ideal for use in many interior and exterior industrial applications to replace rivets, spot welds, liquid adhesives, and other permanent fasteners.

Application:

• The nameplates, label stocks, logo: use in the screen printing, advertising, aviation, aerospace, medical and industrial equipment, automobiles, home appliances, electronic market etc.
• Soft board or FPC: used in mobie phones, laptops, PDA, digital camera, LCM and other electrinic products.

Construction  Information:

                                       3M™ VHB™ Adhesive Transfer Tapes   
Products                            F9460PC     F9469PC      F9473PC

Adhesive Thickness         0.002 in.       0.005 in.        0.010 in.
                                         (0.05 mm)    (0.13 mm)      (0.26 mm)

Liner Material                   58# polycoated Kraft
                                           0.004 in. (0.10 mm)

Electrical and Thermal Properties:

Products                                                                              3M™ VHB™ Adhesive Transfer Tapes
                                                                                           F9460PC        F9469PC         F9473PC
Thermal Coefficient of Expansion                                           770 x 10-6 mm/mm/°C
Thermal Conductivity (ASTM C-177)                                     0.092 BTU-ft/ft2 Hr °F (0.0016 Watts/cm °C)

Dielectric Strength                                                          23°C    125°C  175°C 23°C 125°C 175°C 23°C 125°C 175°C
(Volts per ASTM D-149-97A)                                         1200    1000    1000   3000  2600   1900   5500  N/A      N/A 
 
                                                                                             
Insulation Resistance (ASTM D-1000)                               > 1 x 106 megaohms/in2

Density                                                                            0.04 lb/in3 (0.98 g/cm3)

Application Techniques:

Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength.
To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well unified. Some typical surface cleaning solvents are isopropyl alcohol/water mixture or heptane.
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly
applied, low temperature holding is generally satisfactory.

Product Use:

Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application.

  Features:

Application Techniques:

Product Use:

All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.

 Other Products

Acrylic(VHB) Tape                                         3M 9495LE

Masking Tape                                           3M 467MP

Die Cutting

Certifications

Each roll packed with Poly bag / Blister card / Double blister in standard export cartons.