Dry wall forming machine

Specifications

-Dry wall forming machine
U channel machine,
stud and track machine,drywall forming machine

dry  wall forming machine, drywall forming machine, u channel machine, stud and track machine.

Product's components:

  

This kind of forming machine consists of uncoiler and its base,coil sheet guiding and adjusting device,roll forming system,punching system(optional)Hydraulic post cutting system,PLC control system, run out table.

 

Product's Feature:

 

1.Roll forming craft work

     De-coilerGuiderRoll formingcutting-tolengthcollection table

 

 2.Equipment structure

 .It is making up of de-coiler, guide rack, roll forming system, cutting-to-length,  PLC  control  system etc.

 

 3.unit performance

   Machine capacity:  thickness:0.25-1mm

   Product speed: 0-20m/min

   Total power: about 7kw

   Occupy ground area:  length 12m x width 2m

 

4.Each main part parameter:

De-coiler:  Inner expanding type,  capacity:3T

Roll forming Stations:  12 sets

The diameter of the roller axis:φ50mm, roller surface:150mm

Material: 40Cr   quenching treatment  HB280

Drive type: Chain drive

Main power: 5.5kw timing electromoto

Material:GCr15, Quenching,Hardness:HRC58-62º

Assistant roller rack: 2sets

Adjust part: Turkey emendation type(three-dimensional emendation)

 

5.cutting-to-length system

Hydraulic cutting, Hydraulic pumping station electromotor power: 2.5KW