linear potentiometer position sensor

Specifications

1)linear potentiometer position sensor
2)360 degrees continuous
3)Rotating long life
4)independent linearity
5)360 degree .

 

 

 Potentiometer Expert since year 1967!

Company tenent: "What customer needs is our pursuit!"
Company aim: Pursue technology innovation, create green and intelligent life.

Full inspection: 

 

 

Caution:

1.Use of chemicals:Synthetic resins such as polycarbonate are used in the potentiometer.therefore,care must be taken not expose the resistor to thick atmosphere of ammonia,amins ,alkali solution,aromatic hydrocarbon,ketenes,esters,halogeneous hydrocarbon,ketenes esters,halogeneous hydrocarbons,ets.

2.When soldering ,avoid using water-soluble flux,othrewise,itmight cause and adverse effect on molding material and metal.

3.Although electric poles of resistors are generally formed by silver printing,we provide carbon coating over the silver poles to enhance reliablility against ntact us if you wish to use the part in a low residual resistance state.

 

Product Type & Condition :

1. Because of the fluctuant sales situation. the stock parts are always changing and the stock list cannot be promptly updated . So,please consult the stock situation when you inquire.

 

 Buyer Reading:

1. Please confirm receipt of products if the items you received , and if the goods was damaged please contact us immediately. send the photo to us that we can check and give you best solution .

2. We only guarantee Delivery in time but we couldn't control the express delivery time. Our related sales person will be responsible to send the AWB for the delivered goods in the next workday. you can check the AWB in the website which we send to you. For the AWB you also can call to the local branch of the express company in your company.

 Item No.: WHS(H) 22 linear potentiometer position sensor

Feature

 

1)Flux builded-up prevention is taken through inserting molding around the resistor with resin.

2)A large variety of products lined up to support various applications.

3)Miniature design for Audio applications.

4)Long life type available

 

Electrical characteristics

 

Total rotation angle :260°

Operating force :20-200gf.cm

Shaft stop strength :3kgf.cm/min

Switch working angle/stroke: 30  ±10°

Switch working torque /force:50-300gf.cm

Rated dissipation:0.125w   0.06w

Rated voltage :200V   150V

Insulation resistance :DC500V   500M Ω

Voltage proof:AC500V,1minute

Switch contact resistance:less than 20m Ω

Switch ratings:12VDC  1A

Mechanical endurance :10000cycles

Switch life:10000times

Resistance taper:A /B/ C

 

Rated power	A:1-1.5W
ing voltage	500V
Resistance range & tolerance	100Ω --2MΩ     ±20%
Resistance tape	A. B . C.
End resistance	20 Ω max
Rotational noise	≤ 47mV
Shaft material	metal shaft,can be with plastic shaft
Rotation torque	2--20mN.m
Total mechanical travel	260°±10°
Mechanical life	10000cycles

 

All resistance below 

B101-100Ω

B501--500Ω

B102--1k

B202--2k

• B502--5k

  B103--10k

  B203--20k

  B503--50k

  B104--100k

  B204--200k

  B254--250k

  B504--500k

  B105--1M

   
  Packaging & Shipping

    Each carton contains two inner boxes. Each inner box has 500 pots. total of 25 slots on each layer. 25*2=50pcs each layers.50 pcs for one layer*10 layer=500pcs (10 layer for each box), total in each inner box is 500pcs.Grand total per box is 1000 pcs.

  Size:55cm*45cm*45cm

  Weight:2000pcs 17KG.1000pcs 9KG

• 

 

Company's pictures aggregation 

•