Multi-functional OTDR AV6418
- 40 Case / Cases per Month
- T/T L/C D/P D/A
- 7 days
- ZTE 5928E, RS-5928E, RS-59EC-PWR-AC10, RS-59EC-PWR-DC10, 24 GE RJ45 + 1 expansion card ZTE ZXR10 5928E 5952E 5916E RS-5916E RS-
- ZTE 2952E, RS-2952E-AC, RS-2952E-DC, 48 FE RJ45 4 GE SFP ZTE ZXR10 2952E 2928E 2918E 2910E
- ZTE 3950-28TM, RS-3950-28TM-AC, 24 FE RJ45 + 2 GE SFP + 1 expansion card slot ZTE ZXR10 3950
- ZTE 2950-18TC, RS-2950-18TC-AC, 16 FE RJ45 + 2 GE Combo ZTE ZXR10 2950
- ZTE S2XF48A, 48-port 10GE SFP+ optical interface ZTE ZXR10 8902E 8905E 8908E 8912E RS-8902E RS-8905E RS-8908E RS-8912E
- ZTE 5250-28PM-H, RS-5250-28PM-H, 20 GE RJ45 (POE/POE+) + 4 GE Combo ports + 1 expansion card ZTE ZXR10 5250
Product Details
Place of Origin: | China | Model Number: | AV6418 |
Product Description
Product Summaries:
AV6418 OTDR is a high performance measuring instrument with multifunction designed for testing FTTx network. It’s mainly used to measure the physical characteristics of optical fiber under test, such as the length,the transmission loss and the splice loss etc.. It can also locate the faults or breaks of optical fiber. It's widely applied in the manufacture, construction and maintenance in optical fiber communication system..
Mainly features:
>Handheld,lightweight and convenience for carrying
>45dB high dynamic range
>1m extra-short event dead zone
>0.05m high distance resolution,128k sampling points
>Fast auto measurement,one-button operating
>Test up to four wavelengths with a single unit
>Communication light check automatically
>Remote function via Ethernet
>Double USB interfaces, supporting USB stick and printer and direct cable download to PC vi ActiveSync
>Supporting Bellcore GR196 file format in writing or reading
>Built-in lithium battery with high capacity for over 8 hours of operating life
>Visible fault locating (VFL) and optical power meter
>Universal FC/PC,FC/SC,FC/ST connector type, it's convenient for surface cleaning
>Unique function of updating application software on-line, returning to factory is unnecessary
Extra-short event dead zone
Due to its high resolution, AV6418 OTDR has 1m extra-short event dead zone, which is suitable for testing short optical fiber and pigtail optical fiber.
High-speed auto analyzation
AV6418 can quickly determine and locate the events and faults in trace precisely, then lists all events in even table, so it's very useful to maintainers to improving efficiency and it's Unnecessary to know about the relative background knowledge.
High-speed auto measurement
The function of auto measurement of AV6418 OTDR makes it unnecessary to operator to know about the further details of operating. The operation becomes very simple: after connect the fiber, only press【Start】,then the trace measured is displayed and the events are listed on screen in a few seconds, now, you can view the trace and event table.
Convenient VFL function
he built-in 650nm visual fault locator (VFL) is ideal for identifying bad splice, bad connector, break or macro bend easily. The standard VFL with more than 2 milliwatt output power is factory installed in AV6418, which the operation distance is in excess of 5 kilometers.
Communication Light Check
When measuring a fiber in service, the measuring result by an OTDR is not precise, and there is a potential risk of permanent damage to the internal photoelectric of OTDR receiver. To prevent these problems, the AV6418 OTDR can detect automatically and silently if communication light is present after the fiber under test is connected, once the light is verified present, simultaneously, a warning message will be displayed and internal OTDR protection will be active instantly.
Multiple Wavelengths and Models
AV6418 OTDR can provide any of single mode or multimode or both, designed to test FUT at up to four wavelengths in single unit, such as 850, 1300, 1310, 1383, 1490, 1550, 1625 and 1650nm wavelengths, with which AV6418 can be used widely from long range to FTTx, CATV, LAN, Access and Metro networks.
Abundant external interface
AV6418 has abundant external interface, such as USB, Min-USB, Ethernet, earphone and SD, due to these, it can provide the following functions:
> Training via multimedia for operators, which can enable you become a measuring expert within short time.
> Implementing remote controlling through Ethernet, troubleshooting from long distance for fiber under test.
> Printing trace and event table
> Updating application software on-line
AV6418 OTDR is mainly used to measure FTTx network, it provides multifunctions in one unit. AV6418 offers three measuring modes: manual mode (including real time mode and average mode), auto mode and dead zone mode.
Manual measurement mode: manual mode is suitable for skilled operator who is familiar with the instrument. In this measurement mode, to get more accurate results, real-time mode or Average mode can be selected if necessary.
In real-time mode, the dynamic changes of fiber chain can be detected timely, it is very useful when you need to observe the effect and process of fiber being spliced or connected.
In average measurement mode, the noise in trace can be suppressed, and the SNR(signal noise ratio) is improved, therefore,the result is more accurate. In fact, the more average times is executed, the more noise in trace is suppressed, and the longer time is spent for signal processing. In practice, the average times should be set properly according to necessity.
Auto measurement mode: the optimized measurement conditions are set automatically, it's unnecessary to operator to know about the complicated background knowledge and the further details of operating. In this mode, the more accurate results can be gained when proper average times are set, but it will increase the time of signal processing.
Dead zone mode: this mode is suitable for testing optical fiber with short distance and the optimized settings of distance range, pulse width and attenuator can be executed automatically. To get the best result, the terminal return loss should be guaranteed less than -40dB.
General Specifications:
Dynamic range |
Please refer to "OTDR modules specifications" |
Distance uncertainty |
±(0.75m + sample space + measurement distance×0.003%)1 |
Sampling resolution |
0.05,0.1,0.2,0.5,1,2,4,8,16m |
Distance range |
0.4,0.8,1.6,3.2,6.4,16,32,64,128,256,512km(SMF); |
Pulse width |
5,10,30,80,160,320,640,1280,5120,10240,20480ns |
Loss threshold |
0.01dB |
Sampling points |
Up to 128k |
Linearity |
0.05dB/dB |
Loss resolution |
0.001dB |
Memory capacity |
≥800traces(build-in), ≥65500traces(2GB SD storage) |
Group refractive index setting |
1.00000 to 2.00000 (0.00001steps) |
Distance unit |
km,m,kft,ft |
Display |
640×480, 6.5 inch TFT-LCD (touch screen) |
Interface |
USB, Min-USB, Ethernet, earphone, SD |
Optical connector |
FC/SC/ST (universal connector) |
VFL |
650nm±10nm,2mW(typical);CW/1Hz |
Optical Power Meter |
Wavelength range: 1270nm to 1700nm Measurement range: -60 to +3dBm Measurement accuracy: 5% ( -10dBm, CW) |
Power supply |
AC adapter 100 to 240V, 50/60Hz, 1.5A DC:19V±2V(2A) Built-in Lithium battery: 4400mAh, operating time ≥8 hours 2 |
Language |
User selectable: simplified Chinese, English, Russian, Korean etc.. (please contact CETC 41st for others) |
Environment |
Operating temperature: -10 to 50℃(charging:5 to 40℃) |
Dimensions |
295×186×75(mm) |
Weight |
2.5kg Approx. |
Options:
NO. |
Name |
type |
note |
1 |
USB stick |
|
Saving measuring data |
2 |
SD |
|
Saving measuring data |
3 |
printer |
HP LJ P2015D or HP LJ 1022 |
Printing traces |
4 |
USB cable |
|
Communicating with PC |
5 |
Standby battery pack |
6417LB-1192 |
Standby battery |
6 |
FC/SC,FC/ST connectors |
|
|
Standard accessories
NO. |
Name |
quantity |
1 |
Power line |
1 |
2 |
AC/DC adapter |
1 |
3 |
Quality certification |
1 |
4 |
User manual |
1 |
5 |
Trace analyzing software(CD) |
1 |
6 |
Hard Carrying case(Including gallus) |
1 |
7 |
Special gallus of instrument |
1 |
Contact Us
- Beijing W&F Technology Co., Ltd.
- Contact nameSophia yu
- Phone86-010-51212818
- AddressRoom A200,No.8 ShunYiTiao,DongTieJiangYing,Fengtai district,Beijing, Dezhou,Shandong
fusion splicer | New product | optical fault locator | optical power meter |
OTDR |
- 1240/1310nm Single Mode WDM
- FortiGate FortiWiFi 80F Series FG-80F/FG-81F
- 2x2 Magnet Fiber Optical Switch 1550nm
- 1550nm 1x4 Magnet Fiber Optical Switch SM
- 1520-1580nm 1x2 Magnet Fiber Optical Switch
- Magneto optical switch 1XN
- Magneto optical switch 1X1
- Magneto optical switch 1X1
- Magneto optical switch 1X4
- Magneto optical switch 1X2
- MEMS optical attenuator module
- PM MEMS VOA module
Popular Searches
- Optical Amplifier
- joint closure
- fiber optic
- ftth
- telecommunication
- Camera Dome Enclosure
- video transceiver
- distribution box
- Fiber Optic Equipment
- fusion splicer
- optical fiber splicing machine
- fiber optic fusion splicer
- fiber optic adapter
- optical fiber fusion splicer
- machine fiber optic fusion
- fiber optic splicing kit
Find Similar Products By Category
- Telecommunications > Communication Equipment > Fiber Optic Equipment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Sophia yu
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-