Home > Products > Preheating Station > Infrared Lead Free Soldering Rework Station For Mobile Phone Repairing
Infrared Lead Free Soldering Rework Station For Mobile Phone Repairing
- 0 Set / Sets per Month
- T/T L/C D/P D/A
- 7 days
Product Details
Brand Name: | YIHUA | Place of Origin: | China | Model Number: | 1000A |
Product Description
Infrared Lead Free Soldering Rework Station For Mobile Phone Repairing Feature
1. Using the new SAMSUNG microcomputer processor PID programmable temperature control technology and uses an infrared source and optics to target heat to individual components without dislodging other SMT parts by way of eddies air currents.
2. Adopt infrared weld technology which independent exploration , infrared penetration strength , components uniform heating , beyond the traditional hot air heating vowed to prevent blow off the IC surrounding small components.
3. Technician focused infrared heat is easy to target most component removal/replacement and re-work.
4. Infrared heat source bulbs are long-lived , unexpensive and easily replaced.
5. Has bright delicate , low voltage LED lighting, safety and energy conservation.
6.It has External Sensor Temperature control mode , that is detected by the sensor IC surface temperature control temperature , this function is good for freshman operation , it’s safe way protect components .
7.Mount Technology (SMT) components 15-35cm in size.
8. This machine has 540W heating system , widely to 120mm*120mm.
9. Preheating plate color is black , from the photics point of view , black color easy to absorb heating , shorten the warm-up time.
10. Powerful human function design , with the following functions
A. Temperature correction function Correction of temperature range -50°C~+50 °C ( Infrared lamp analog value 580 ).
B. Celsius / Fahrenheit temperature display function
11. This machine also has soldering iron function , if you have the device ,you can used for all of the components solder , desoldering , preheating , repair all components , especially Micro BGA components.
Infrared Lead Free Soldering Rework Station For Mobile Phone Repairing Technical Data
Voltage AC 220V±10%
Max power consumption 715W
Preheating station parts
Max power consumption 540W
Light-emitting components Far infrared heating plate
Temperature Range 50°C-300°C / 122°F~572°F or 50 °C ~200 °C / 122°F~488°F
Display Type LED
Preheating area 120*120mm
Infrared lamp part
Max power consumption 150W
Light-emitting components Infrared emission lamp
Temperature Range 100°C-350°C / 212°F~662°F
Temperature Stability ±1°C
Display Type LED
Effective irradiation area 35*35mm
Come with 2 lens cup , you can be choice two of lens cup from 28mm / 38mm / 48mm.
Soldering station part
Max power consumption 75W
Heating components imported heater
Temperature Range 200°C-480°C / 392°F~896°F
Temperature Stability ±1°C ( statics )
Tip of ground voltage <2mV
Tip ground impedance <2 ohm
Display Type LED Display
Handle cable length ≥100cm
Operation infrared BGA rework station NOTICE
1. Repair circuit boards required precautions and necessary protective measures
1) To ensure that both sides of the circuit board preheat zone without fusible explosive flammable components , like Plastic , Display , Phone camera , LED , Electrolytic capacitors.
2) Ensure that no combustible fusible explosive components in Infrared light can shine on the area , If you can not avoid , Must use reflective paper keep out that. like Plastic , Display , Phone camera , LED , Electrolytic capacitors.
2. According to IC size , use a suitable diameter lamp cup ( lamp cup size larger than IC size ) ; Install lights Cup minimize the distance between lamp and IC , to facilitates heating.
3. Ensure that the working environment is no greater airflow to prevent heat loss , well sheltered measures when necessary.
4. Apply solder paste to the IC before the desoldering , also you can early preheat then Apply solder paste , Especially BGA package IC , should be early preheat then apply solder paste , the can make solder paste penetrate into the bottom of the IC.
5. Wear heat protective gloves and goggles. Place the visor , good shading measures to protect the eyes.
6. Turn on the Infrared light power , set the temperature to about 280°C.Make the appropriate adjustments based on the size of the IC and circuit board . IC by infrared light irradiation will be rapidly warming ( generally 1 to 3 minutes) .
7. Just started using this product , it is best to try to use the abandoned circuit board rework a few times. and so familiar with the use of this product , then carry out normal maintenance work.
Infrared Lead Free Soldering Rework Station
Contact Us
- Yihua Electronic Equipment Co., Ltd.
- Contact nameMr. gou
- Phone86-020-87470526
- AddressNo.7, ShaJing East Road, YongXing industrial estate, LongGui Linyi,Shandong
2 In 1 Soldering Station | 3 In 1 Soldering Station | BGA Rework Station | Hot Air Rework Station |
Preheating Station | SMD Rework Station | Solder Rework Station |
- gravel rake
- red color riveted grass lawn rake
- Trustworthy Supplier Red Rake Heads, Twelve Teeth Single Color Steel Rake
- Best Quality Garden Rake, Double Color Steel Leaf Rake
- Oem Offered Rake Tines, Steel Rake Riveted, Garden Leaf Rake
- Best Price Silver Color Steel Hay Rake, Garden Rake Types
- Strict Time Control Supplier Olive Rake, Green Spray Paint Lawn Rake
- Custom Logo Hand Harrow Rake, 10 Teeth Rake Heads
- Lawn Rake
- PLASTIC LEAF RAKE1
- PLASTIC LEAF RAKE2
- PLASTIC LEAF RAKE3
Popular Searches
Find Similar Products By Category
- Tools > Garden Tools > Rake
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Mr. gou
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-