Hopper Car Block Liners White Cast Iron For Grinding Mills Dia3.02m

Hopper Car Block Liners White Cast Iron For Grinding Mills Dia3.02m

High Cr White Iron Chute Liners Feature:

1. Used for Ore Reduction;
2. Alloy: 15%Cr, 18%Cr and 20%Cr and 26%Cr;

3. Dimensions: 320/580;
4. Microstructure: Fine martensite + Carbide;

5. Hardness: more than HRC58;

6. Material Grade: KmTBCr18.

 
High Cr Cast Iron Mill Liners Description:

1. High Chrome white iron we can produce includes 15%Cr, 18%Cr and 20%Cr and 26%Cr;
2. Excellent wear performance: under same working condition, the wear property of High Chrome mill liners is four times of that of high manganese steel liners and twice of that of low Chrome alloy steel liners;
4. Microstructure:  Fine martensite + Carbide + Austenite(less than 6%);
5. International Standard to be applied:  AS2027, ASTM A532 and BS4844.

 

In the recent 20 years, our liners have been widely used in large, medium and small ball mills in Chinese power generation, mining, cement, Chemical engineering and metallurgical industries and super fine pulverizing equipments. It is the only recommended liner product in the latest standard of the electric-power industry in China.

Technical Parameters

Wuxi Orient Anti-wear Engineering Co., Ltd.
Chemical Composition & Mechanical Property of Wear-resistant Castings

Item	Cr-Mo Alloy Steel I	Cr-Mo Alloy Steel II	Cr-Mo Alloy Steel III	High Cr white iron	High Cr Alloy Steel	High Manganese Steel	Ni-Hard cast iron
C	0.30~0.50	0.65~0.90	0.40~0.90	2.40~3.20	1.1~2.2	0.90~1.30	2.40~3.60
Si	0.50~1.20	≤0.75	0.70~1.20	0.60~1.20	0.60~1.20	≤0.08	≤0.80
Mn	0.40~1.20	0.50~1.20	0.60~1.00	0.50~1.00	0.50~1.00	11.00~18.00	≤2.0
Cr	1.70~2.50	1.50~2.50	4.00~7.00	12.00~30.00	11.00~30.00	1.50~2.50	1.5~10
S	≤0.04	≤0.06	≤0.04	≤0.04	≤0.04	≤0.04	≤0.15
P	≤0.04	≤0.06	≤0.06	≤0.06	≤0.06	≤0.06	≤0.15
Mo	≤0.5	≤0.5	≤0.5	0.10~3.0	0.10~3.0	≤1.0	≤0.10
Cu	0.10~0.60	≤0.25	0.20~0.40	0.10~1.00	0.10~1.00	-	-
Ni	≤0.50	≤0.30	0~0.30	0~0.30	0~0.30	-	3.3~10
Re