Single Wing 65 KG Drop Package Testing Equipment For Product / Package Performance

Delivery Time:15 days after receive the deposit
Certification:ISO 9001: 2008

Single Wing 65 KG Drop Package Testing Equipment For Product / Package Performance

What is Drop Testing? 

Drop testing determines the ability of a package to withstand the rigors of handling by people and machinery in the distribution environment. Numerous studies have shown conclusively that a truly flat drop represents the worst possible input to a packaged product. Therefore, it is crucial that laboratory drop testing be done on a drop test system designed to insure the flattest impacts possible. In addition to accurate flat drop testing, this machine allows drop testing to be performed on the package\'s edges and corners, for complete performance evaluation. Drop Testers allow you to thoroughly examine the effectiveness of package cushioning and its ability to protect your product, dunnage, closures, and other critical design attributes when exposed to all possible drop test orientations.

Brief Introduction 

This tester can determine the ultimate dimension in drop testing and incline impact testing for product and package performance which uses as reference to improve the packing. Special fixtures are available to  allow for corner and edge drops.

Specifications

Drop Height	300 - 1500mm
Max Weight of Specimen	65 kg
Test space	800×800×800
Impact board dimensions(mm)	1400×1200
Corbel dimensions(mm)	700×350
Motor	Highten 1/3P,manual wide adjustment
Overall dimensions(mm)	1400×1200×2200
Net weight(kg)	500
Power	380V   50HZ   5A
Meet the standard	ISO22488-1972(E)
Manner of execution	Motor-driven drop, hand reset

Theory

This machine simulates the freedom drop movement from different heights. 

Standard

Design standards:GB4757.5-84 JISZ0202-87 ISO2248-1972(E)

Features 

1. Advanced structure ensure that bracket and specimen separate freely and specimen drop freely through bracket rapid downward motion then rotation movement.

2. It delivers perfect test for specimen side, edge and corner.

3. This device simulates the drop/ fall of a finished product to evaluate the damage. All the rhombohedrons, angles and faces of the products can be tested.

Photo Reference