Home > Products > Thermic Lance > underwater cutting rods alloy that will burn independently after an arc is struck and oxygen is flowing through the tube
underwater cutting rods alloy that will burn independently after an arc is struck and oxygen is flowing through the tube
- 99999 Piece / Pieces per Month
- shanghai
- T/T
- 7 days
Product Details
Thickness: | 1, 3.5 | Section Shape: | Round | Outer Diameter: | 10.5, 75 |
Product Description
What is underwater cutting torch?
A thermal lance, thermic lance, oxygen lance, or burning bar is a tool that heats and melts steel in the presence of pressurized oxygen to create the very high temperatures required for cutting. It consists of a long steel tube packed with alloy steel rods, sometimes mixed with aluminium rods to increase the heat output. One end of the tube is placed in a holder and oxygen is fed through the tube.
The far end of the tube is pre-heated and lit by an oxyacetylene torch. An intense stream of burning steel is produced at the workpiece end and can be used to cut rapidly through thick materials including steel and concrete. The tube is consumed, so every few minutes the operator shuts off the oxygen, discards the remaining stub of a lance tube and starts using a new one.
Although often used as a heavy duty demolition tool, the thermic lance can also be used to remove seized axles of heavy machinery without damaging the bearings or axle housing. This technique is most often used on the pins and axles of large equipment such as cranes, ships, bridges and sluice-gates.
The temperature at which a thermal lance operates varies depending on the environment.Kosanke gives the maximum temperature to be 4500 °C (8130 °F), while Wang calculates it to be 2730 °C (4950 °F)
Parameter of underwater cutting torch
1. Commodity: | widely usage underwater cutting rod |
2. Out Diameter: | 10.5-75mm |
3. Wall Thickness: | 1-3.5mm |
4. Length: | 2m-12m |
5. Producing Standard: |
|
6. Main Material: (Carbon Steel & Low Alloy steel) |
|
7. Special specifications: | Available according to customer’s requirements and quantity. |
8. End Shape: | Beveled end , plain end, varnished, or adding plastic caps to protect the two ends as per customer’s requirements |
9. Surface treatment: | Ceramic coated, aluminum coated or uncoated |
10. Certificates: | ISO,OHSAS18001 |
11. Third party inspection: | Welcome you to send a third party inspecting company (BV, SGS etc) to check the quality of our final products. |
Detailed pictures show of underwater cutting torch
In 2011, JIANGSU XINGRUI PIPING CO.,LTD was formed to provide OXYGEN LANCE and THERMIC LANCE to the commercial steel-makingand foundry casting industry. We provided the base of industry blow oxygen or inject carbon into electric arc furnace solutions and skilled experience of exothermic cutting methods.
Today, the company operates within a 24,000 square foot multiplex in China,this location offers a large inventory storage capability and four workshops for complex on-site fabrication capable of designing and producing standard or customizedoxygen lancing pipe & thermic lances.
All Xingrui pipes are manufactured according to the highest relevant safety standards and passes our
rigorous quality controls before dispatch.
Innovation and inspiration,we always meet and value your various requirements.
Detailed package of underwater cutting torch
Package: STRAPPED BUNDLE WRAPPED IN PLASTIC
Application of underwater cutting torch
1. Melt-cutting and perforation: suitable for alloy castings of various materials, stainless steel castings, cast iron parts, cast steel parts, non-ferrous metal castings, disintegration of slag, casting risers, burrs, etc., metal, non-metal , concrete, rock and other perforations.
2,.cleaning: to solve all kinds of castings sand (sand sand / sand), casting core, casting internal hole sintered clay sand cleaning, the melting eye of each melting furnace, bridge, water outlet slag blocking problem
More detailed information on underwater cutting torch, pls contact by Jane(at) .
Contact Us
- JIANGSU XINGRUI PIPING CO.,LTD
Calorised Pipe | Ceramic coated | Thermic Lance | Oxygen lance |
- High quality Stainless Steel Pipe Square/Round Steel Pipe High Quality Seamless Steel Pipe
- Good Quality 50mm*50mm 100mm*100mm Hollow Section Rectangular S235 S275 Stainless Steel Square Steel Pipe
- Hollow cross-section black iron square steel pipe ERW technology JIS certification structural application length 6m
- Best-Selling China Manufacture ASTM AISI A36 Carbon Square Steel Pipe
- ASTM/ASME A333GR.6 American Standard Seamless Steel Pipe 508 * 9.53 American Standard Seamless Pipe for Low Temperature Pipelines
- ASME A3335P91 alloy high-pressure boiler tube 114.3 * 8.56 seamless steel pipe
- SA-106Gr C seamless steel pipe 159 * 16 SA-106M standard
- 06Cr18Ni11Ti stainless steel seamless steel pipe 273 * 10 GB/T14976-2012
- Q345D seamless steel pipe 325 * 12 seamless pipe for high-pressure fertilizer equipment GB/T6479-2013
- Seamless steel pipes for 16MnDG low-temperature pipelines GB/T18984-2016 219 * 6
- 09crcusb alloy seamless steel pipe 38 * 3 ND steel
- Mining machinery cold drawn seamless square and rectangular steel tube with high performance and low price
- various specificatipns high strength special-shaped steel pipe with support customization and competitive price
- Specifications Seamless Pipe 45# Large Diameter Thin Wall Seamless Pipe Seamless Steel Pipe
- China Factory price round seamless pipe Precision Bright Seamless Steel Pipe
- Seamless Steel Pipes Carbon Seamless Building Materials High quality Low price
- Professional factory directly supply carbon seamless-pipe welded steel pipe sharp corner various shape
- MS Seamless and welded Carbon Steel Pipe Tube ASTM A53 A106 GR.B SCH 40 black iron seamless steel pipe
- High Standard ASTM A192 high pressure annealing seamless steel pipe and tube
- High Quality Multifunctional OEM ODM ASTM a106 20# seamless steel pipe for petroleum chemical machinery electric power
- Professional export Q235B 10 # carbon steel seamless steel pipe galvanized seamless pipe 20 # seamless steel pipe
- ASTM Q235/Q235B/Q345/Q345B Hot rolled Carbon Seamless Steel Pipe High Strength
- Support Customization Reliable Quality Q235 18 Inch Seamless Steel Pipe
- Excellent quality GI seamless steel tube and pipe hot dip galvanized steel
Popular Searches
Find Similar Products By Category
- Minerals & Metallurgy > Steel > Steel Pipes
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-