Filter Inserts For CC Jensen CJC Oil Filtration Systems PD5600616,PA5600606,PD5600619,PD5600625,PD5600627,PD5600628

Warm Tips: 

We can supply most of the manufacturers of filter accessories, complete model, the goods quickly, quality assurance.

Limited space, not one by one show, if demand, please contact, thank you!

Air filtration, liquid filtration, gas filtration, hydraulic oil filtration, petroleum filtration, 
dust filtration, coalescers, separators - we can all produce!
No matter which brand - we can produce!
No matter which model - we can produce!
You have needs - please contact us.

Fine Filters are offline oil filtration systems with integrated circulating pump for off-line installation. The filters are recognized around the world as highly efficient purification systems for applications involving hydraulic oil, lubrication oil, gear oil, quenching oil, phosphate esters and more.

Fine Filters are ideal for controlling oil contamination levels for particles, water and degradation products (oxidation resin/sludge, varnish). The Depth Filters have a filtration degree of 3 microns absolute and a very large dirt-holding capacity.

Fine Filters deliver measurable customer benefits: lower operation and maintenance costs, increased productivity, and maximum lifetime for system components, in-line filters and oil. The modular filter units are built and sized to specific customer requirements - whether the oil volume is 2 litres or 200,000 litres.

EC Filter Inserts  

Specially designed for adsorption of oil degradation products and reducing acidity

EC Filter Inserts are made for adsorption of oil degradation products, reducing varnish and acidity and increasing the resistivity of the oil.  EC Filter Inserts contain Fuller´s Earth, a natural adsorbent primarily of alu­minium silicates (clay minerals). Its large surface area enables enhanced non-selective adsorption of oil contaminants such as acidic oil degradation and oxidation by-products, resins, sludge, and varnish. The EC Filter Inserts may be used to remove varnish and acidic oil degradation products from high temperature oil and thus reduce the TAN and MPC values. 

The EC Filter Inserts must be used in combination with cellulose Filter Inserts as post filters, either in the last stage of a HDU multi stay Filter or in a HDU single stay Filter using hybrid Filter Inserts. 

Applicable in the following oils:

Mineral oil

Hydraulic fire resistant fluids (HFD) 

Glycol oil  - Polyalkylene glycols (PAG) 

Ester oil  - Polyolester oil (POE), Phosphate Ester oil, Environmentally acceptable Lubricants (EAL) and biodegradable oils

Used in the following applications:

Transformer insulation

Gear and bearing lubrication

Hydraulic systems 

Compressor lubrication

Turbine lubrication 

Engine lubri­cation 

User benefits:

Reduction of TAN and MPC, Increase of Resistivity 

EC Filter Inserts adsorb acidic oil degradation products and varnish, lower MPC and TAN and increase the Resistivity of the oil. 

Prolonging the oil life time and avoiding oil change

EC Filter Inserts eliminate oil contaminants and oxidation catalysts, restore and maintain the oil in good condition.

Preventing failures and mitigating risk of downtime 

Clean oil ensures reduced wear, extended component lifetime and lower O&M costs

We offer an extensive cross for the following brand

Our filtration equipment is used in a wide range of industries:

Advanced production process: